Back to School at FamilyEducation.com

DIGITAL ELECTRONICS

The simplest kind of electronics, known as analogue electronics, works with continuous signals – a smoothly rising and falling sound wave goes through an analogue circuit as a smoothly rising and falling voltage. Digital electronics works differently. Using SAMPLING, it converts signals into strings of numbers that can be processed mathematically by electronic circuits.

ANALOGUE – SIMPLE BUT RISKY

The wiggly grooves of a record mimic the shape of the original sound wave. The pick-up produces an electrical wave the same shape as the wiggles. Unfortunately, it copies faithfully everything it finds on the disc – so scratches come out as noisy clicks.

DIGITAL – LESS NOISY

The surface of a CD looks nothing like the original sound waves. Before sound is put on a CD, digital electronic circuits convert it into complicated on–off patterns, which are pressed into the plastic as a series of pits. The patterns allow the CD player to play just the music and leave out the scratches.

SAMPLING

Before a signal can be handled by digital electronics, it has to be converted into digital form. In sampling, circuits called analogue-to-digital converters make thousands of measurements of the signal each second. The measurements are then converted into binary form, which is a way of writing numbers with just two digits – ideal for on–off electronic switches.

FROM WAVES TO NUMBERS

Digital sound starts with a electrical circuit that samples an analogue sound signal about 44,000 times each second. This rate of sampling is needed to capture the highest frequencies (speeds of vibration) in the original sound wave. The circuit stores the value of each sample for just 20 millionths of a second – the time it takes to convert it into binary form.

NUMBER CODE

The numbers from the sampled sound wave are handled in binary code, which uses only two digits – 1 and 0. In electronics, the corresponding code is “on” and “off”. Samples in this form can be sent as pulses. On a CD, samples use a complex error-correcting code to make the CD more resistant to scratches.

SIGNAL PROCESSING

Sampling is not limited to sound. It is used to convert the picture in a camera phone into digital form. The picture is sliced into thousands of tiny square samples, called pixels. A small computer inside the phone works on the samples to produce a simplified picture, which can be sent to someone else more quickly than the original picture. Their phone changes the samples back into a picture again.

ELECTRONIC CALCULATOR

Pocket calculators would not be possible without digital electronics. They handle numbers as electrical signals that are either on or off. This is because they do their maths with transistors – electronic switches that, like other switches, can only turn on or off. Numbers in this form can easily be processed by the calculator’s LOGIC CIRCUITS to produce the right result.

LOGIC CIRCUITS

Computers function by breaking big problems down into thousands of smaller ones. They then solve these little problems one by one until the job is done. All the actual work is done by logic gates – circuits that obey the rules of logic. Each logic gate obeys a single, simple rule, such as saying that C is true only if A and B are true. With enough gates, computers can solve any problem that is strictly logical. Most of the millions of transistors at the heart of a computer are in logic gates.

LOGIC CHIP

The large, complex chips in digital circuits are often supported by smaller logic chips. Each of these devices contains only a few logic gates. The gates are made from transistors and resistors formed on the surface of silicon.

LOGIC GATES

Logic signals turn on (1) and off (0) to signal true and false. Gates have any number of inputs, but only one output. An inverter always has one input. Here are two examples of logic gates.

AND GATE

The output turns on only if all of the inputs are on. It turns off if any of them are off.

OR GATE

The output turns on if any of the inputs are on. It turns off only if all of them are off.

INVERTER

The output turns on only if the input is off. It turns off only if the input is on.

BIOGRAPHY: GOTTFRIED LEIBNIZ German, 1646-1716

A binary system was known in ancient China, but mathematician Gottfried Leibniz wrote about it in 1703. He was, however, mainly interested in its philosophical meaning because, before computers, it was not of much practical use. Leibniz was also one of the inventors of calculus, a branch of mathematics that is very important in science.

Copyright © 2007 Dorling Kindersley

stay connected

Sign up for our free email newsletters and receive the latest advice and information on all things parenting.

Enter your email address to sign up or manage your account.

Facebook icon Twitter icon Follow Us on Pinterest

editor’s picks

highlights

Join BIC on our mission to save handwriting and Fight For Your Write! Writing helps kids become better readers, boosts their confidence and sparks their creativity. Visit BICFightForYourWrite.com to sign our petition to save handwriting!

11 Coolest Lunch Boxes for Kids
Send your child's lunch to school in style! Check out our picks for the 11 best lunch boxes with great features from BPA-free accessories to spill-resistant fabric.

7 Important Back-to-School Safety Tips
Follow these back-to-school safety tips to make sure your child stays safe on the way to school, in the classroom, and while on the playground.

Kindergarten Readiness App Wins Gold
Our Kindergarten Readiness app won the Gold Award of Excellence in the educational category at the 2014 Communicator Awards. This valuable checklist comes with games and activities to help your child practice the essential skills she needs for kindergarten. Download the Kindergarten Readiness app today!